Alpha Cd28c fault Failing to light: Boiler is failing light, gas not passive through gas valve
Published 18 November 2026 · Generated by BoilerTag's diagnostic AI from an engineer's real-world submission
One of 17 real-world fault checklists on BoilerTag, across 7 boiler makes.
Most likely cause
The Alpha CD28C boiler is failing to light, and gas is not passing through the gas valve. The fault code, if displayed as a continuously illuminated 'B' indicator, signifies a burner failure to light. The igniter, gas valve, and PCB have already been replaced. This suggests a deeper issue beyond these common component failures. The boiler is a wall-mounted, fan-assisted, room-sealed condensing combination boiler designed for natural gas. It uses an electronic ignition system and a modulating fan and gas valve to control heat output.
The engineer's report
A gas engineer submitted this case through BoilerTag's free fault diagnostic tool, working on a Alpha Cd28c displaying fault code Failing to light. They described the behaviour they were seeing on site as follows:
“Boiler is failing light, gas not passive through gas valve”
Before requesting the AI diagnostic, the engineer had already worked through the following checks:
“New igniter, new gas valve, new pcb ”
BoilerTag's diagnostic AI then cross-checked manufacturer documentation and common trade knowledge to produce the prioritised checklist below.
Diagnostic checklist
Email me this checklist
Get the full Alpha Cd28c diagnostic — steps, safety notes and parts — sent to your inbox to keep or share on site.
Sources
The AI cross-checked the following manufacturer and trade sources while producing this checklist.
Tag it once. Get rebooked every year.
Stick a BoilerTag on the boiler. The homeowner scans the QR when the service is due — your name and number are right there. Your first 12 tags are free.
Get 12 free BoilerTagsThis checklist is provided for reference only. Always follow manufacturer documentation and stay within Gas Safe scope. BoilerTag does not replace a qualified engineer's own judgement.
Fixed a fault the hard way? Add your fix — help the next engineer →